Ga door naar hoofdinhoud

Reemplazo de teclado en PowerBook G4 Aluminum 12" 1-1.5 GHz

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 27 handleidingen die deze stap bevatten.

Stap 1 vertalen

Stap 1
PowerBook G4 Aluminum 12" 1-1.5 GHz Keyboard Replacement: stap 0, afbeelding 1 van 1
  • On the keyboard, remove the F1, F2, F11, and F12 keys.

  • This is scary - take a deep breath before continuing. Place your index finger under the upper left corner of the key and lift up until you hear a click. Then, transfer your finger to the left edge of the key and lift up to pull the key off.

  • You're freeing the two tabs on the left of the key from the two small holes in the plastic scissors mechanism.

  • When replacing the keys in the keyboard, place the key directly over the slot where it will go and press down until you hear the key click into place.

En el teclado retira las teclas F1, F2, F11 y F12.

Esto es peligroso - respira profunda antes de continuar. Coloca tu dedo índice debajo de la esquina superior izquierda de la teclado y levántala hasta que oigas un click. Después mueve tu dedo al borde izquierdo de la tecla y levántalo para sacar la tecla.

Estas liberando las dos pestañas en el lado izquierdo de la tecla de dos pequeños agujeros en el mecanismo de tijeras de plástico.

Cuando reemplaces las teclas en el teclado, coloca la tecla directamente sobre el slot donde irá y presiona hacia abajo hasta que oigas que la tecla entra en su lugar.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.