Ga door naar hoofdinhoud

MacBook Pro 13" Unibody Early 2011 Optical Drive Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 11 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 2
MacBook Pro 13" Unibody Early 2011 Optical Drive Replacement: stap 0, afbeelding 1 van 1
  • Carefully pull the camera cable out of its socket on the logic board.

  • Though not recommended by iFixit staff, some users opt to omit this step completely. For information on this, see the step comments.

  • Pull the cable parallel to the face of the logic board. Pulling it upward may damage the logic board or the cable itself.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.