Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Repair a Cracked or Buckled Polyurethane Surfboard

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 8 vertalen

Stap 8

Repair a Cracked or Buckled Polyurethane Surfboard: stap 0, afbeelding 1 van 2

Repair a Cracked or Buckled Polyurethane Surfboard: stap 0, afbeelding 2 van 2

In your mixing cup, pour enough resin to cover the entire area thoroughly.
Mix in an even amount of Q-Cell filler and stir until well-mixed.
Once well mixed, add catalyst (hardener) as normal : i.e., 5-6 drops per 20ml of resin (a drop or two more if the weather is cold; a drop or two less if the weather is warm).
If doing a large mix (this repair is a large mix), you do not need to add as much hardener. 75% of the total will be fine as it is plenty to catalyze the reaction.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.