Ga door naar hoofdinhoud

Apple Watch 42mm Touchscreen aus Glas tauschen

Stap 2
Apple Watch 42mm Glass Digitizer Only Replacement, Disconnecting the LCD assembly: stap 0, afbeelding 1 van 2 Apple Watch 42mm Glass Digitizer Only Replacement, Disconnecting the LCD assembly: stap 0, afbeelding 2 van 2
Disconnecting the LCD assembly
  • When inserting the knife & plastic tools around the edges be sure not to go further than 1mm into the AMOLED. The force touch gasket lies directly underneath the glass and is easily damaged if pushed on too hard with a knife or other metal object. The FPC clip is tricky but is easily removed using sharp point tweezers on the battery edge.

Achte beim Einsetzen des Messers und der Kunststoffwerkzeuge an den Kanten darauf, dass du nicht weiter als 1 mm in das AMOLED eindringst.

Die Force-Touch-Dichtung liegt direkt unter dem Glas und kann leicht beschädigt werden, wenn man mit einem Messer oder einem anderen Metallgegenstand zu fest darauf drückt. Der FPC-Clip ist knifflig, lässt sich aber mit einer scharfen Pinzette am Batterierand leicht entfernen.

[title] Disconnecting the LCD assembly
-[* black] When inserting the knife & plastic tools around the edges be sure not to go further than 1mm into the AMOLED. The force touch gasket lies directly underneath the glass and is easily damaged if pushed on too hard with a knife or other metal object. The FPC clip is tricky but is easily removed using sharp point tweezers on the battery edge.
+[* black] When inserting the knife & plastic tools around the edges be sure not to go further than 1mm into the AMOLED. The force touch gasket lies directly underneath the glass and is easily damaged if pushed on too hard with a knife or other metal object. The FPC clip is tricky but is easily removed using sharp point [product|IF145-020|tweezers] on the battery edge.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.