Ga door naar hoofdinhoud

iPod Nano 第二代外壳组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 10
iPod Nano 2nd Generation Case Assembly Replacement: stap 0, afbeelding 1 van 1
  • The highlighted connector attaches the click wheel and headphone jack to the logic board. This cable must be disconnected from the logic board before continuing.

黄色方框内的接口将iPod 点按式选盘和耳机插孔连接到主板上。 在继续拆解之前,必须断开此排线与主板的连接。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.