Ga door naar hoofdinhoud

Sostituzione gruppo copertura iPod Nano 2a generazione

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 5
iPod Nano 2nd Generation Case Assembly Replacement: stap 0, afbeelding 1 van 1
  • Use a metal spudger to carefully pry the headphone jack out of the casing. DO NOT remove the headphone jack from the iPod entirely, as it is connected via a fragile ribbon connector to the click wheel.

Usa uno spudger in metallo per rimuovere attentamente la presa jack dalla copertura. NON rimuovere del tutto la presa jack dall'iPod, in quanto è ancora collegata con un delicato cavo a nastro alla ghiera cliccabile.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.