Ga door naar hoofdinhoud

Reemplazo de iPod Mini Display

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
iPod Mini Display Replacement: stap 0, afbeelding 1 van 1
  • Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.

  • Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.

Desliza con cuidado el iPod para sacarlo de su carcasa presionando la placa lógica cerca del borde inferior de la rueda de clic.

No tires de la placa de la toma de auriculares en la parte superior del iPod, ya que el conector de la placa lógica es frágil.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.