Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Use a heat gun to soften the adhesive underneath the camera/microphone cover.
-
Pry the camera/microphone cover off the case with a metal spudger and remove it.
-
Use a hot glue gun to apply a bead of glue across the cover.
-
Move the nozzle in the glue for 20 seconds to heat the lens adhesive holding the lens in place.
-
Press a spudger into the hot glue and hold it in place until the glue cools and hardens.
-
Pull on the spudger with firm steady force, while using a fingernail to pry on the cover edge.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.