The screen remains.
Compare your new replacement part to the original part. You may need to transfer remaining components (such as the two rubber grommets at the bottom of the screen) before installing.
The Touch ID function will ONLY work with your phone's original home button assembly, so you'll need to transfer the home button assembly from your old screen to your new screen to retain Touch ID.
Your replacement part may come with an extra Phillips screw already installed left of the Home Button. Remove the unnecessary screw so that you can reinstall the home button bracket.
After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.
After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.
Volgende regel
Vorige regel
Voeg hieronder een nieuwe regel toe
Voeg hierboven een nieuwe regel toe
Huidige regel laten inspringen
Maak het inspringen van deze regel ongedaan
Huidige regel verwijderen
Navigeer naar de volgende stap.
Navigeer naar vorige stap.
Help openen