Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Use a #1 Phillips head screwdriver to remove the screw on the middle right of the RAM's cover panel.
-
Then, use a the blue iFixit Opening Tool to pry the cover panel off.
-
Push on to the RAM tabs to disconnect the RAM form the device.
-
The RAM will pop off from the socket. Gently pull the RAM out of the socket.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.