Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 16 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Remove the following five screws:
-
One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).
-
Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.
-
One 10 mm Phillips near the optical drive.
-
One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
-
Lift the EMI fingers above the battery connector away from the metal framework.
Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.