Power Mac G4 Quicksilver Power Supply Replacement

Vorige stap Volgende stap

Stap 3 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 3

Power Mac G4 Quicksilver Power Supply Replacement: stap 0, afbeelding 1 van 1

There are three 2.5mm hex bolts located in the back of the computer that also need to be removed.
A 3/32" Hex Key or Hex Driver, or a T10 Torx, are a bit small but may also work if gentle.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.