Ga door naar hoofdinhoud

Plastic Snap Installation Using a Hand Press

Engels
Nederlands
Stap 2
Plastic Snap Installation Using a Hand Press, Die identification: stap 0, afbeelding 1 van 1
Die identification
  • There's a metal die for each snap piece: the cap die, the socket die, and the stud die. Dies are unique to the snap size.

  • Patagonia Repair Tech Tip: The socket and stud dies look like the opposing snap so that the plastic piece will click right in.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.