Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Mac Mini Mid 2010 AC-In socket repair

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 4 vertalen

Stap 4

Mac Mini Mid 2010 AC-In socket repair, Cleaning the solder, re-insulate wires: stap 0, afbeelding 1 van 3

Mac Mini Mid 2010 AC-In socket repair, Cleaning the solder, re-insulate wires: stap 0, afbeelding 2 van 3

Mac Mini Mid 2010 AC-In socket repair, Cleaning the solder, re-insulate wires: stap 0, afbeelding 3 van 3

Cleaning the solder, re-insulate wires

The AC wires actually have a crimped pin-plug on the end. You will have to use flux and soldering wick to clean as much solder from the so they fit back nicely in the original PCB holes.
After the solder blobs on the pins are removed, insert two pieces of heat-shrink tubing over the wires and hear them with a lighter/match/candle/hot air gun.
Make sure the heat-shrink tubing won't cover the pins at the end of the wires, else you will have difficulties re-soldering them.
Also use soldering wick to clean the two holes in the PCB for easier reassembly.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.