Ga door naar hoofdinhoud

MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 14
MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement: stap 0, afbeelding 1 van 2 MacBook Pro 15" Unibody Mid 2009 Logic Board Replacement: stap 0, afbeelding 2 van 2
  • Remove the single 7 mm Phillips screw securing the display data cable retainer to the upper case.

  • This screw may remain captive in the display data cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

  • Remove the display data cable retainer from the upper case.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.