Ga door naar hoofdinhoud

バッテリーの接続の外し方

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.

Stap 2 vertalen

Stap 2
Battery Disconnection, Disconnect the battery: stap 0, afbeelding 1 van 2 Battery Disconnection, Disconnect the battery: stap 0, afbeelding 2 van 2
Disconnect the battery
  • Use a spudger to pry up and disconnect the battery press connector.

  • Don't pry against the motherboard, as you risk breaking small, surface-mounted components.

  • Your E-ink screen will continue to say Powered off even after disconnection—this is normal!

バッテリーのプレスコネクタをこじあけて、接続を外します。

マザーボードをこじあけないでください。小さな表面実装部品が破損する恐れがあります。

取り外した後も、E-ink画面には「Powered off(電源オフ)」と表示されますが、これは正常な状態です。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.