Ga door naar hoofdinhoud

Sostituzione batteria Logitech G Pro X Superlight

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3 vertalen

Stap 3
Logitech G Pro X Superlight Battery Replacement: stap 0, afbeelding 1 van 1
  • Remove the battery.

  • During reassembly:

  • Never install a deformed or damaged battery, as doing so is a potential safety hazard. Replace it with a new battery.

  • If you're reusing the battery, the adhesive should be sticky enough to use again.

  • If the adhesive isn't sticky enough, or if your new battery doesn't come with adhesive, apply strips of thin, double-sided tape to the battery recess (not directly to the battery).

  • If your new battery has adhesive pre-installed, remove the plastic liner to expose the adhesive.

  • Make sure the cable is pointing towards the front of the shell (closest to the scroll wheel), and firmly press the battery into place.

Rimuovi la batteria.

Durante il rimontaggio:

Mai installare una batteria deformata o danneggiata, poiché è un potenziale pericolo per la sicurezza. Sostituiscila con una nuova batteria.

Se stai riusando la batteria, l'adesivo dovrebbe essere abbastanza appiccicoso per riusarlo.

Se l'adesivo non è abbastanza appiccicoso, o se la tua nuova batteria non è provvista di adesivo, applica delle strisce di nastro biadesivo sottile all'alloggiamento della batteria (non direttamente sulla batteria).

Se la tua nuova batteria ha dell'adesivo preinstallato, rimuovi le pellicole di plastica per scoprirlo.

Accertati che il cavo sia rivolto verso la parte anteriore del case (più vicino alla rotella del mouse) e premi saldamente la batteria in posizione.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.