Ga door naar hoofdinhoud

Logitech G Pro X Superlight フットの交換

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 3
Logitech G Pro X Superlight Feet Replacement: stap 0, afbeelding 1 van 3 Logitech G Pro X Superlight Feet Replacement: stap 0, afbeelding 2 van 3 Logitech G Pro X Superlight Feet Replacement: stap 0, afbeelding 3 van 3
  • The feet have two layers—a rubberized one and an adhesive pad underneath.

  • If you're reusing the feet, be very careful not to separate the two layers or damage the feet.

  • Carefully slide the point of a spudger under the circular foot, making sure it goes under both the foot and its adhesive pad.

  • The foot recesses have a small notch that makes it easier to slide your spudger under.

  • Gently slide the spudger farther under the foot and lift until you can grab it with your fingers.

フットには2つのレイヤー層が付いています。1つはゴムレイヤー、もう1つはその下に接着パッドが付いています。

フットを再利用する場合は、2つのレイヤーが分離したり、フットを破損しないように十分注意してください。

スパッジャーの先端を丸いフットの下に慎重に滑らせ、フット接着パッドの両方の下に通します。

足のくぼみには小さな切り欠きがあり、スパッジャーを下に滑り込ませやすくなっています。

スパッジャーをゆっくりとフットの下に滑らせ、指でつかめるようになるまで持ち上げます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.