Stap 6 vertalen
Stap 6
connector removal
-
Before removing the board, it is necessary to remove the display connectors.
-
For this, remove: the top front camera connector, the battery connector in the middle, and the circuit connector on the left middle.
-
We'll also need to remove the bottom two wires which I have pointed to in the spudger. Be very gentle in removing these as even twisting them too much can damage them.
-
For good measure, you can also remove the audio jack connection on the bottom right, but it is not necessary.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.