Ga door naar hoofdinhoud

Motorola Edge Back Cover Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 16 handleidingen die deze stap bevatten.

Stap 1 vertalen

Engels
Nederlands
Stap 1
Motorola Edge Back Cover Replacement, Heat the bottom edge: stap 0, afbeelding 1 van 1
Heat the bottom edge
  • Completely power off your phone before you begin.

  • Heat an iOpener, then apply it along the bottom edge of the back cover for two minutes.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone because the display and internal battery are both susceptible to heat damage.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.