/
Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Lid worden
Inloggen

Xbox Series X 中心机箱组件更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 17 handleidingen die deze stap bevatten.

Terug naar de handleiding
Engels
Chinees
Vorige stap

Stap 6 vertalen

Stap 6
Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: stap 0, afbeelding 1 van 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: stap 0, afbeelding 2 van 3 Xbox Series X Center Chassis Assembly Replacement, Remove the center chassis assembly: stap 0, afbeelding 3 van 3
Remove the center chassis assembly

  • The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.

  • Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.

  • Lift out the center chassis assembly to remove it from the shell.

  • During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

拆下中央底盘总成

中心底盘通过导向钉与外壳对齐。这些钉子需要从插槽中滑出，才能将机箱抬起。

握住中央底盘并将其拉向外壳顶部，将导向销与外壳分离。

提起中央底盘组件，将其从外壳中取出。

在重新组装过程中，确保将中央机箱降低到外壳中时，任何带状电缆都不会被夹住。

[title] Remove the center chassis assembly
[* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out.
-[* black] Grip the center chassis and pull it towards the top of the shell, uncoupling the guide pegs from the shell.
-[* black] Lift up the center chassis assembly to remove it from the shell.
- [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.
+[* black] Grip the center chassis and pull it towards the green fan grille at the top of the shell, uncoupling the guide pegs from the shell.
+[* black] Lift out the center chassis assembly to remove it from the shell.
+[* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.