Ga door naar hoofdinhoud

Smontaggio iPhone 12 e iPhone 12 Pro

Stap 21
iPhone 12 and 12 Pro Teardown: stap 0, afbeelding 1 van 3 iPhone 12 and 12 Pro Teardown: stap 0, afbeelding 2 van 3 iPhone 12 and 12 Pro Teardown: stap 0, afbeelding 3 van 3
  • Prying up the coils reveals the circuit board—alas, It's covered by a metal shield.

  • With new iPhones on the horizon, there's no time for microsoldering today. We skip straight to the flush cutters to get through. The result isn't beautiful, but it's what we came for.

  • The little circuit board houses a chip labeled STWPSPA1. This is likely a close cousin to STMicroelectronics' STWBC-EP, their 15 W wireless charger IC.

Il distacco delle bobine rivela il circuito stampato: ma, ahimè, è coperto da una schermatura metallica.

Con i nuovi iPhone all'orizzonte, oggi non c'è tempo per operazioni di microsaldatura. Quindi passiamo senz'altro a un bel taglio a filo. Il risultato non si può dire elegante, ma è quanto volevamo ottenere.

La piccola scheda accoglie un chip con l'etichetta STWPSPA1. È probabilmente un parente stretto del STWBC-EP di ST Microelectronics, cioè il loro IC per la ricarica wireless da 15 Watt.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.