Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch)

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 15 vertalen

Stap 15

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch), Apply the lower adhesive strips: stap 0, afbeelding 1 van 3

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch), Apply the lower adhesive strips: stap 0, afbeelding 2 van 3

iMac Intel 21.5" Display Adhesive Strips Replacement (Custom Notch), Apply the lower adhesive strips: stap 0, afbeelding 3 van 3

Apply the lower adhesive strips

The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
Grasp the red film pull tab on the 4R adhesive strip and pull to remove the backing from the strip.
Align the strip on the bottom edge of the rear enclosure such that the right end of the strip sits next to—but does not overlap—adhesive strip 3.
Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.