Saeco Minuto outer case

Stap 1

Open the service Dior.

Stap 2

Remove one T10 Torx screw securing the top of the grinder.

Stap 3

If you haven't already done so: Unscrew the center Torx T10 screw at the bottom of the coffee spout distributor.

Stap 4

Unscrew the Torx T10 screw securing the coffee spout distributor inside.

Stap 5

Lift the coffee spout distributor up and remove it.

Stap 6

You should now be able to lift the inner frame out of the outer one. On some models, it is still attached with other screws.

Stap 7

This is what the inner frame looks like from three sides. All components are easily accessible, especially the pump, the flowmeter and the heater.

Stap 8

And this is what the completely gutted outer case looks like. It can now be cleaned well.