Remove five screws, but the screws at the top left and right are special screws. I was able to loosen them with needle-nosed pliers and some fumbling and replaced them with Phillips screws

Stap 2 — Detach side panel and cover

The side wall can now be opened and removed together with the cover.

Stap 3 — Remove magnetic switch

The arrow points to the plug connection to the control electronics. When assembling, reattach accordingly

Stap 4 — Clean magnetic switch

I had toast crumbs between the magnets and the anchor, which prevented them from working properly. I removed/scraped off these crumbs.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.