Ga door naar hoofdinhoud

Reemplazo de la pantalla de Huawei P20 Pro

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 2
Huawei P20 Pro Screen Replacement: stap 0, afbeelding 1 van 1
  • Prepare an iOpener and apply it to the display for at least two minutes to loosen the adhesive beneath.

  • You may need to reheat and reapply the iOpener several times to get the phone warm enough on all sides. Follow the iOpener instructions to avoid overheating.

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass.

  • Lay overlapping strips of clear packing tape over the display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

Prepara un iOpener y aplícalo a la pantalla durante al menos dos minutos para aflojar el adhesivo que se encuentra debajo.

Es posible que debas recalentar y volver a aplicar el iOpener varias veces para que el teléfono se caliente lo suficiente por todos lados. Sigue las instrucciones del iOpener para evitar el sobrecalentamiento.

Si el vidrio de tu pantalla está agrietado, puedes contener más roturas y evita daños corporales durante la reparación pegando cinta adhesiva sobre el vidrio.

Coloca tiras superpuestas de cinta de embalaje transparente sobre la pantalla hasta que toda la cara quede cubierta.

Esto mantendrá los fragmentos de vidrio contenidos y proporcionará integridad estructural al hacer palanca y levantar la pantalla.

Usa gafas de seguridad para proteger tus ojos de cualquier vidrio que se haya sacudido durante la reparación.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.