Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

Read guide note How to rebuild a laptop CMOS battery

Terug naar de handleiding

Engels

Chinees

Vorige stap Volgende stap

Stap 3 vertalen

Stap 3

*Read guide note* How to rebuild a laptop CMOS battery, Verify polarity and tape the leads onto the new cell: stap 0, afbeelding 1 van 3

*Read guide note* How to rebuild a laptop CMOS battery, Verify polarity and tape the leads onto the new cell: stap 0, afbeelding 2 van 3

*Read guide note* How to rebuild a laptop CMOS battery, Verify polarity and tape the leads onto the new cell: stap 0, afbeelding 3 van 3

Verify polarity and tape the leads onto the new cell

ONLY USE ENOUGH TAPE FOR A FIRM HOLD. Using too much may short out the cell! In addition to using as little tape as possible, the cell must be tested before installation with a multimeter!
After the polarity has been matched, tape the positive lead to the new cell. To remove the risk of a failed rebuild, start on the + side and cut the tape to fit comfortably.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.