Ga door naar hoofdinhoud

Logitech MX Master reinigen

Stap 2
Cleaning Logitech MX Master, Removing the Feet: stap 0, afbeelding 1 van 2 Cleaning Logitech MX Master, Removing the Feet: stap 0, afbeelding 2 van 2
Removing the Feet
  • The mouse has four feet on the bottom, but only the two long ones need to be removed. I used the Jimmy from the Pro Tech Toolkit.

  • I didn't have new feet on hand, so I had to reuse the original ones. This is why there's no step for cleaning the adhesive off and putting new feet on.

Die Maus hat vier "Füße" an der Unterseite, aber nur die beiden längeren müssen entfernt werden. Nutze dafür das Jimmy aus dem Pro Tech Toolkit.

Ich hatte keine neuen Füße zur Hand, also musste ich die Originalfüße wiederverwenden. Deshalb wird nicht gezeigt, wie der Klebstoff entfernt und neue Füße angebracht werden.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.