Stap 1 vertalen
Stap 1
-
Apply 1-2 drops of high-concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.
-
Alternatively, apply a freshly heated iOpener to the display directly behind the battery for two minutes to help soften the adhesive. Re-heat and reapply the iOpener as necessary.
[* icon_note] The battery is strongly glued into place. | |
- | [* black] If available, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive. |
+ | [* black] Apply 1-2 drops of high-concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive. |
+ | [* icon_caution] Using too much alcohol can damage the display. |
[* black] Alternatively, [guide|25705|apply a freshly heated iOpener] to the display directly behind the battery for two minutes to help soften the adhesive. Re-heat and reapply the iOpener as necessary. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.