Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Using the Phillips #00 screwdriver, remove the two screws holding the circle pad in place. Be sure to keep these screws separate from the bottom cover screws, the circle pad screws are slightly longer and only compatible with the circle pad.
  • Using the Phillips #00 screwdriver, remove the two screws holding the circle pad in place.

  • Be sure to keep these screws separate from the bottom cover screws, the circle pad screws are slightly longer and only compatible with the circle pad.

  • Lift the circle pad out of its place to expose the ZIF connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.