Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
Remove the two rubber bumpers on the back of the device with a thumb tack. Using the Phillips #00 screwdriver, remove all 8 of the screws holding the bottom cover to the motherboard. Lift off the bottom cover, being sure not to disconnect the two ZIF connectors for the L/R buttons on the back of the device.
  • Remove the two rubber bumpers on the back of the device with a thumb tack.

  • Using the Phillips #00 screwdriver, remove all 8 of the screws holding the bottom cover to the motherboard.

  • Lift off the bottom cover, being sure not to disconnect the two ZIF connectors for the L/R buttons on the back of the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.