Ga door naar hoofdinhoud

iPod Nano 7th Generation Display Assembly Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: stap 1, afbeelding 1 van 2 iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: stap 1, afbeelding 2 van 2
    • Insert a spudger under the metal midframe and display on the left side of the home button.

    • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

    • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

  2. iPod Nano 7th Generation Display Assembly Replacement: stap 2, afbeelding 1 van 1
    • Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sam Goldheart

Lid sinds: 10/18/12

465.252 Reputatie

538 handleidingen geschreven

Team

iFixit Lid van iFixit

Staff

136 Leden

16.573 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 69