Ga door naar hoofdinhoud
Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Remove the four T10 Torx screws securing the power supply to the rear case.

The fine-thread screw belongs in the lower right corner of the power supply. When reinstalling the power supply, install the fine-threaded screw first.

Lift the power supply out of the rear case, minding the AC-in cable that may get caught.

Do not touch the face of the power supply board to avoid electric shock.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.