Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 6 handleidingen die deze stap bevatten.
Stap 2 vertalen
Stap 2
-
Using a Phillips #000 screwdriver, remove all 18 of the 4mm screws.
-
With the blue plastic opening tool, gently wedge the tool between the screen and the gray frame until you feel resistance.
-
Using your opening tool, push in the teeth towards the center of the device, and gently pull off the frame.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.