Emson Star Wars R2-D2 Humidifier Fan Replacement

Vorige stap Volgende stap

Stap 6 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 6

Emson Star Wars R2-D2 Humidifier Fan Replacement: stap 0, afbeelding 1 van 1

This is where the fan is located. Carefully remove the fan from its compartment.
At this stage, you may remove the pin connector of the fan from the printed circuit board. However, it may be difficult to pull the pin. We recommend removing the printed circuit board for more clearance during removal.
Remove the screws on the printed circuit board using the same PH1 driver.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.