Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 3 vertalen
Stap 3
-
Push the tip of a spudger beneath the rubber adhesive and toward the battery to free it from the surface of the logic board.
-
Start freeing the adhesive from around one of the outer leads, then free it from the two gaps between leads, and finally push the spudger along the back side of the leads to completely remove it from the logic board/battery leads.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.