Ga door naar hoofdinhoud

MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement

Engels
Nederlands
Stap 5
MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: stap 0, afbeelding 1 van 1
  • Avoid placing the spudger within 20mm (3/4") of the built in camera. There is no adhesive in this location, and the spudger could damage the camera.

  • Continue the technique described in the previous step to release the bezel along the top and on the left side.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.