Ga door naar hoofdinhoud

DeWalt DW660 Power Switch Replacement

Stap 3 vertalen

Engels
Nederlands
Stap 3
DeWalt DW660 Power Switch Replacement: stap 0, afbeelding 1 van 3 DeWalt DW660 Power Switch Replacement: stap 0, afbeelding 2 van 3 DeWalt DW660 Power Switch Replacement: stap 0, afbeelding 3 van 3
  • Pick up the switch from the device with the wires still attached.

  • Remove the actuator from the switch.

  • Pull the two wires from the switch.

  • Make sure to remember where each pin went on the switch after replacement.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.