HP Split x2 Screen Replacement

Vorige stap Volgende stap

Stap 5 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 5

HP Split x2 Screen Replacement: stap 0, afbeelding 1 van 1

Glue is holding the device together along the edges. The glue is can be very strong. A heat gun may be required to loosen the glue for removal of the digitizer to prevent damage to the screen.
Apply pressure to to the sides of the tablet.
Separate the digitizer from the the body of the tablet.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.