Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 8 —

Stap type:

Sleep om te herschikken

If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.

Prepare an iOpener and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.

After about a minute, flip the phone over and use a plastic card to tear through any remaining adhesive.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.