Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten

How to repair a frayed Apple AC Adapter Wire

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 5 vertalen

Stap 5

How to repair a frayed Apple AC Adapter Wire, Add an additional layer on the ends of the Mac Charger Wire's Diameter: stap 0, afbeelding 1 van 2

How to repair a frayed Apple AC Adapter Wire, Add an additional layer on the ends of the Mac Charger Wire's Diameter: stap 0, afbeelding 2 van 2

Add an additional layer on the ends of the Mac Charger Wire's Diameter

The 3/8"(10mm) Heat Shrink Tube has a minimum diameter after shrinking (0.19"/5mm) that is larger than the Mac Charger Wire's Diameter. So, to create a proper hold, we need to increase its diameter. Wrap it in an electric tape or something like the red wire covering shown in the picture, to increase its diameter before shrinking it.
There is also 4:1 Shrink Ratio Tubing where you might not need to do this, but 2:1 Shrink Ratio Tubing is typically easier to get if you don’t want to order online.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.