Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
-
Use the flat end of a spudger to pry the I/O board cable connector up out of its socket on the I/O board.
-
Carefully peel, but do not remove, the I/O board cable off the adhesive securing it to the top of the fan.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.