Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 28 handleidingen die deze stap bevatten.
Stap 3 vertalen
Stap 3
-
While gently pulling the I/O board cable upward near its connection to the logic board, use the flat end of a spudger to pry up on alternating sides of the connector to help "walk" it out of its socket.
-
Remove the I/O board cable.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.