Ga door naar hoofdinhoud

AirPort Extreme A1521 Internal Structure Replacement

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 2
AirPort Extreme A1521 Internal Structure Replacement: stap 0, afbeelding 1 van 2 AirPort Extreme A1521 Internal Structure Replacement: stap 0, afbeelding 2 van 2
  • Four black internal wires, three thin and one thick, are connected to the logic board: three by small end clips and one by a larger end clip. Handle the clips gently; they break easily.

  • To detach the small clips from the connectors, place the flat end of the plastic spudger underneath the clip and gently lever it away from the center of the device.

  • To detach the large clip from its connector, place the flat end of the spudger on the clip and lever it upward out of the connector.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.