Ga door naar hoofdinhoud

Circuit Board Housing Removal

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 1 vertalen

Engels
Nederlands
Stap 1
Circuit Board Housing Removal: stap 0, afbeelding 1 van 3 Circuit Board Housing Removal: stap 0, afbeelding 2 van 3 Circuit Board Housing Removal: stap 0, afbeelding 3 van 3
  • Locate the 5 screws holding the body of the phone together.

  • The top screw will have a plastic cover, remove it using tweezers.

  • Using a Philips head screwdriver, twist counterclockwise to remove the screws.

  • Take special care with the screw located at the top of the phone. It is smaller and more likely to be damaged or improperly attached.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.