MODRETRO Chromatic Disassembly

Vorige stap Volgende stap

Stap 5 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 5

MODRETRO Chromatic Disassembly, PCB: stap 0, afbeelding 1 van 3

MODRETRO Chromatic Disassembly, PCB: stap 0, afbeelding 2 van 3

MODRETRO Chromatic Disassembly, PCB: stap 0, afbeelding 3 van 3

PCB

Remove the PCB screw (x1) using a Tri-wing Y1 Screwdriver.
Carefully lift the LCD screen ribbon cable from the PCB.
Handle with care!
Carefully remove the PCB from the front shell.
Lifting at a slight angle will help clear the headphone jack on the bottom more easily. This is also important during re-assembly.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.