Dell 1350cnw Power Supply Board Replacement

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

Dell 1350cnw Power Supply Board Replacement, Unplug electrical connectors: stap 0, afbeelding 1 van 1

Unplug electrical connectors

Pull up on the circled electrical connectors to remove from the power supply board.
Pull one end of the ribbon cable out from its connector to unplug.
The ribbon cable may be easier to remove by pulling up from the control board (green PCB) rather than pulling out horizontally from the power supply board.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.