Ga door naar hoofdinhoud

Apple Thunderbolt Display Black Blanking Out Repair

Engels
Nederlands
Stap 32
Apple Thunderbolt Display Black Blanking Out Repair, Reinstall & Align magnetic brackets: stap 0, afbeelding 1 van 1
Reinstall & Align magnetic brackets
  • The 2 L bracket likely got bent during the difficult removal. Bend as necessary to straighten.

  • Facing LCD glass down on a flat surface. Install brackets to ensure magnets are flush against the flat surface. Install Torx Screws. This is the alignment to ensure magnetic glass installation will be flush

  • On bottom straight bracket, clamp the 2x black lifting tab under the bracket. Tabs can easily break over their folds. Not a problem.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.