Ga door naar hoofdinhoud

Apple Thunderbolt Display Black Blanking Out Repair

Engels
Nederlands
Stap 9
Apple Thunderbolt Display Black Blanking Out Repair, Remove T-Con, Unstick Buffer Board: stap 0, afbeelding 1 van 3 Apple Thunderbolt Display Black Blanking Out Repair, Remove T-Con, Unstick Buffer Board: stap 0, afbeelding 2 van 3 Apple Thunderbolt Display Black Blanking Out Repair, Remove T-Con, Unstick Buffer Board: stap 0, afbeelding 3 van 3
Remove T-Con, Unstick Buffer Board
  • Rotate up T-Con (pivot on flex cable side) and release it from sticky tape. Likely difficult first time to release the tape.

  • Unlatch t-con to buffer board flex on buffer board side. Wiggle t-con board gently to release flex from connector (likely difficult on first release)

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.