HP EliteBook x360 830 G7 Touchpad Removal

Vorige stap Volgende stap

Stap 2 vertalen

Terug naar de handleiding

Engels

Nederlands

Stap 2

HP EliteBook x360 830 G7 Touchpad Removal: stap 0, afbeelding 1 van 2

HP EliteBook x360 830 G7 Touchpad Removal: stap 0, afbeelding 2 van 2

Use a spudger or a clean fingernail to flip up the locking flap on the motherboard.
Use the widest tool possible to avoid damaging the delicate hinge pins.
Use tweezers or your fingers to gently pull the cable out of its socket by the tab.
To reconnect, make sure the locking flap is flipped up and gently reinsert the cable. Then, flip the locking flap down to secure the cable. The cable should slide into the socket with little to no force. If you're having trouble, remove it, check that the flap is fully unlocked, and try again.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.